王洪波的学术论文信息

最新问答

• Luck丶美人蕉

  ---------------------------代表性论文-----------------
  [1] Hongbo Wang and Fumio Kasagami. A Patient Transfer Robot ween Bed and Stretcher, the IEEE Transactions on Systems, Man and Cybernetics Part B, 2008, 38 (1), pp. 60-67 (SCI)
  [2] Hongbo Wang, Ke Yu, Bingyi Mao, “Self-localization and Obstacle Avoidance for a Mobile Robot,” Neural Computer and Application, 2009, 18 (5): 495-506(SCI)
  [3] Hongbo Wang and takakazu Ishimatsu. Vision-based Navigation for an Electric Wheelchair Using Ceiling Light Landmark, Journal of Intelligent and Robotic Systems, 2005. Vol. 41, pp. 283-314 (SCI)
  [4] 王洪波,齐政彦, 胡正伟, 黄 真,“并联腿机构在四足/两足可重组步行机器人中的应用,” 机械工程学报, 2009, 45 (8): 24-30.
  [5] 王洪波, 等. 病人搬移设备的机电一体化设计和应用. 机 械 工 程 学 报, 45(8): 68-74, 2009.
  [6] Hongbo Wang, Ke Yu and Hongnian Yu, “Mobile Robot Localisation Using ZigBee Wireless Sensor Networks and a Vision Sensor,” International Journal of Modelling, Identification and Control,10(3/4):184-193,2010.
  [7] Hongbo Wang, Zhengyan Qi, Guiling Xu, Fengfeng Xi, et al., Kinematics Analysis and Motion Simulation of a Quadruped Walking Robot with Parallel Leg Mechanism, The Open Mechanical Engineering Journal, (4):77-85, 2010.
  [8] Hongbo Wang, et al., Load control based on PIC microcomputer for a training machine suited to elderly people, Int. J. Intelligent Systems Technologies and Applications, 7(4): 382-395, 2009.
  [9] Hongbo Wang, Xiaohua Shi, Hongtao Liu, Liang Li, Zengguang Hou and Hongnian Yu. Design, kinematics, simulation, and experiment for a lower-limb rehabilitation robot, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering July 18, 2011, 225 (6): 860-872.
  -------------------------2012年-----------------
  期刊论文
  [1] Xiaohua Shi, Hongbo Wang, Lin Yuan, Zhen Xu, Hongwei Zhen, Zengguang Hou, Design and Analysis of a Lower Limb Rehabilitation Robot, Advanced Materials Research, 2012, 490-495: 2236-2240.
  [2] Hongbo Wang, Xue Yang, Xiaoqian Zheng, Ning Du, Hongwei Zhen, and Zengguang Hou, Design and Analysis for Minimally Invasive Vascular Interventional Surgical Robot System, Advanced Science Letters, 2012,8: 31-36.
  国际会议
  -------------------------2011年-----------------
  期刊论文
  [1] Fengfeng XI, Yuwen LI, Hongbo WANG. Module-based method for design and analysis of reconfigurable parallel robots,Front. Mech. Eng. 2011, 6(2): 151–159.
  [2] Hongbo Wang, Xiaohua Shi, Hongtao Liu, Liang Li, Zengguang Hou and Hongnian Yu. Design, kinematics, simulation, and experiment for a lower-limb rehabilitation robot, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering July 18, 2011, 225 (6): 860-872.
  国际会议
  [1] Xue Yang, Hongbo Wang, Lin Yuan, Ning Du, Zengguang Hou. Minimally Invasive Vascular Interventional Surgical Robot System, 2011 IEEE International Conference on Mechatronics and Automation, August, Beijing, pp.124-129.
  [2] Hongbo Wang, Xue Yang, Guoqing Hu, Zengguang Hou and Hongnian Yu. Catheter Intervention Manipulation System of Minimally Invasive Robotic Surgery, Proceedings of the 2011 International Conference on Advanced Mechatronic Systems, Zhengzhou, China, August 11-13, 2011, pp. 211-216.
  -------------------------2010年-----------------
  期刊论文：
  [1] Hongbo Wang, Ke Yu and Hongnian Yu, “Mobile Robot Localisation Using ZigBee Wireless Sensor Networks and a Vision Sensor,” International Journal of Modelling, Identification and Control,10(3/4):184-193,2010.
  [2] Hongbo Wang and Zhengwei Hu, Road edge recognition for mobile robot using laser range finder, Int. J. Advanced Mechatronic Systems,2(4): 236-245, 2010.
  [3] Hongbo Wang, Zhengyan Qi, Guiling Xu, Fengfeng Xi, et al., Kinematics Analysis and Motion Simulation of a Quadruped Walking Robot with Parallel Leg Mechanism, The Open Mechanical Engineering Journal, (4):77-85, 2010.
  [4] 王洪波, 史小华, 赵永生, 史艳国, 姚建涛, 基于CDIO教育理念的项目教学实践与探索, 中国教育研究论坛, 2010,11(130):15-17.
  [5] 王洪波,史小华, 张庆玲, 王志松, 赵玉琴基于项目的单片机原理及应用实践教学改革,” 现代教育导引杂志, 2010，76：63-65.
  [6] 赵永生, 姚建涛, 郑魁敬, 王洪波, 李仕华, 史艳国, 五位一体式“机电一体化系统设计”课程教学体系的建构与实践，中国教学，2010,(3):40-42.
  [7] 王洪波, 徐桂玲, 张典范, 胡星, 助老助残四足/两足可重构并联腿 步行机器人运动学建模与,燕山学报，2010,34（6）：508-515.
  会议论文：
  [1] Guoqing Hu; Zhengwei Hu; Hongbo Wang, Complete Coverage Path Planning for Road Cleaning Robot, 2010 IEEE International Conference on Networking, Sensing and Control, April 10–12, 2010, Chicago, USA, 2010: 643-648.
  [2] Zhengwei Hu and Hongbo Wang, Tian Zhang, Xiaoqian Zheng, and Xue Yang, Path Planning and Control System Design for Cleaning Robot,IEEE International Conference on Information and Automation,Harbin, China June 20-23, 2010: 2368-2373.
  [3] Hongbo Wang, Zhengyan Qi, Guiling Xu and Zhen Huang, Reconfiguration Plan Analysis of Quadruped/Biped Walking Robot with Parallel Leg Mechanism, 2010 IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications，Qingdao, China，July 15-17, 2010: 196-201.
  [4] Guoqing Hu, Liang Li, Hongbo Wang and Yun Xiang, A Novel Active Training Machine Used for Elderly People, The 2010 International Conference on Modelling, Identification and Control (ICMIC 2010), Okayama, Japan, July 17-19, 2010: 688-691.
  [5] Fengfeng Xi, Yuwen Li, Hongbo Wang, A Module-Based Method for Design and Analysis of Reconfigurable Parallel Robots, Proceedings of the 2010 IEEE International Conference on Mechatronics and Automation August 4-7, 2010, Xi'an, China, 2010: 627-632.
  -------------------2009年-----------------
  期刊论文：
  [1] Hongbo Wang, Ke Yu, Bingyi Mao, “Self-localization and Obstacle Avoidance for a Mobile Robot,” Neural Computer and Application, 2009, 18 (5): 495-506
  [2] 王洪波,齐政彦, 胡正伟, 黄 真,“并联腿机构在四足/两足可重组步行机器人中的应用,” 机械工程学报, 2009, 45 (8): 24-30.
  [3] 王洪波, 等. 病人搬移设备的机电一体化设计和应用. 机 械 工 程 学 报, 45(8): 68-74, 2009.
  [4] Hongbo Wang, et al., Load control based on PIC microcomputer for a training machine suited to elderly people, Int. J. Intelligent Systems Technologies and Applications, 7(4): 382-395, 2009.
  [5] 张立丽, 王洪波. 基于PIC 单片机的直流电机控制器的设计[J]. 计算机工程与设计, 2009, 2009, 30 (11): 2681-2683.
  会议论文：
  [1] Zhengyan Qi, Hongbo Wang, Zhen Huang, “Kinematics of a Quadruped/Biped Reconfigurable Walking Robot with Parallel Leg Mechanisms,” ASME/IFToMM International Conference on Reconfigurable Mechanisms and Robots (ReMAR 2009), June 2009, London, UK, pp. 558-564.
  [2] Zhengwei Hu, Hongbo Wang and Hongnian Yu. Sensor Based Road Boundary Recognition of Mobile Robot, The 2009 IEEE International Conference on Networking, Sensing and Control(ICNSC2009),March 26-29, 2009, Okayama, Japan, pp. 210-215.
  [3] Hongbo Wang, Hongtao Liu, Xiaohua Shi and Zengguang Hou. Design and Kinematics of a Lower Limb Rehabilitation Robot, 2nd International Conference on Biomedical Engineering and Informatics, 17-19 October, 2009, Tianjin, China. pp. 1174-1177.
  [4] Peng-Feng Li, Zeng-Guang Hou, Feng Zhang, Min Tan, Hong-Bo Wang, Yi Hong, Jun-Wei Zhang, An FES Cycling Control System Based on CPG, 31st Annual International Conference of the IEEE EMBS Minneapolis, Minnesota, USA, September 2-6, 2009, pp. 1569-1572.
  [5] Wang Hongbo, Shi Xiaohua, Li Liang A New Active Training Machine for Aged People. 机械设计与研究, 2009年增刊（2009中国机构与机器科学应用国际会议）, pp. 120-122
  -------------------2008年-----------------
  期刊论文：
  [1] Hongbo Wang and Fumio Kasagami. A Patient Transfer Robot ween Bed and Stretcher, the IEEE Transactions on Systems, Man and Cybernetics Part B, 2008, 38 (1), pp. 60-67 (SCI)
  [2] 王洪波，田行斌，张海明，黄真，“差动机构在全方位移动机器人上的应用，”机械设计与研究，2008, (2)。
  会议论文：
  [1] Hongbo Wang. Path Planning Based on Ceiling Light Landmarks for a Mobile Robot, 2008 IEEE International Conference on Networking, Sensing and Control, Sanya, China, April 6-8, 2008, pp.1593-1598(EI, STPT）
  --------------------------2007年以前-----------------
  --------------------------国际期刊-----------------
  [1] Wang H.B., Huang Z., Kinematic Influence Coefficient Method of Kinematic and Dynamic Analysis, Mechanism and Machine Theory, 1990, 25(2): 167-173 (SCI)
  [2] Huang Z, Wang H.B., Dynamic Force Analysis of n-DOF Multi-Loop Complex Spatial Mechanisms, Mechanism and Machine Theory, 1992, 27(1), 97-105 (SCI)
  [3] Hongbo Wang, Takakazu Ishimatsu and Jamal Mian. Self-Location for an Autonomous Wheel Chair, JSME International Journal, 1997, 40(3),pp. 433-438 (SCI)
  [4] Wang .B., Ishimatus T.Schaerer C. Huang Z., Kinematics of a Five-Degrees-of-Freedom Prosthetic Arm, Mechanism and Machine Theory,1998, 33(7):895-908 (SCI)
  [5] Hongbo Wang, Chul-Ung Kang, Takakazu Ishimatsu and Tsumoru Ochiai. Auto Navigation on the Wheel Chair, International Journal of Artifical Life and Robotics, 1998, 1(4), pp. 141-146
  [6] Hongbo Wang and takakazu Ishimatsu. Vision-based Navigation for an Electric Wheelchair Using Ceiling Light Landmark, Journal of Intelligent and Robotic Systems, 2005. Vol. 41, pp. 283-314 (SCI)
  --------------------------国际会议-----------------
  [8] Wang Hongbo and Huang Zhen, Dynamic Force Analysis of Six-DOF Parallel Multi-Loop Robot Manipulator, ASME Paper 86-DET-68, October, 1986
  [9] Wu Shengfu, Wang Hongbo and Huang Zhen, The Relation Between Workspace and Construction Parameter of the Parallel Robot Manipulator, Proc. of Asian Conf. on Robotics and Its Application, Hongkong, April, 1991, pp. 425-428
  [10] Uhrhan Christoph, Hongbo Wang and Takakazu Ishimatsu. Inverse Kinematic and Simulation of a Prosthetic Arm, Proc. of Asian Control Conf., Tokyo, July, 1994, pp. 611-614
  [11] Hongbo Wang, Takakazu Ishimatsu, Uhrhan Christoph and Zhen Huang. Kinematic Analysis of a Prosthetic Arm, The 3rd Int. Conf. on Automation, Robotics, and Computer Vision, Singapore November, 1994,pp. 682-686
  [12] Hongbo Wang, Chul-Ung Kang, and Takakazu Ishimatsu. Computer Control of Wheel Chair by Using Landmark, Proc. of the 10th Korea Automation Control Conf.(International Program), October 1995, pp. 388-391
  [13] Izuru Yoshioka, Nobuyoshi Taguchi, Baek Ju Yeol, Hongbo Wang and Ishimatsu Takakazu, Coordnation of Dual Arm Robot Using 3-D Vision Sensor, Proc. of the 10th Korea Automation Control Conf.(International Program), October 1995, pp. 400-403
  [14] Chul-Ung Kang, Hongbo Wang, Takakazu Ishimatsu and Tsumoru Ochiai. Wheel Chair Assisted with Laser Range Finder, Proc. SPIE Int. Conf. Machine Tool, In-Line, and Robot Sensor and Control, Philadelphia, October, 1995, Vol. 2595: pp. 92-99 (EI)
  [15] Hongbo Wang, Chul-Ung Kang, and Takakazu Ishimatsu. Auto Navigation on the Wheelchair, Proc. of Int. Symp. on Artifical Life and Robotics, Oita, February 1996,pp. 199-202
  [16] Hongbo Wang, Takakazu Ishimatsu and Christof Schaerer. Position Analysis of a Prosthetic Arm, Proc. Of the IASTED Int. Conf. on Robotics and Manufacturing, Honolulu, Hawaii, August, 1996, pp. 287-290
  [17] Hongbo Wang, Takakazu Ishimatsu, and Jamal Mian, Vision-guided Navigation for a Wheel chair, Conf. on Robotics and Manufacturing, Hawaii, USA, August, 1996,pp. 145-148
  [18] Hongbo Wang, and Takakazu Ishimatsu. Path Planning for an Autonomous Wheelchair, Proc. of 2nd Int. Workshop on Advance Mechatronics, Nagasaki, Japan, December 1997, pp. 260-264
  [19] Izuru Yoshioka, Nobuyoshi Taguchi, Baek Ju Yeol, Hongbo Wang and Ishimatsu Takakazu, Tele-Operation of Coordinated Dual Arm Robot Using Delta Type Master Arm, Proc. of Int. Conf. on Precision Engineering, November, 1997,
  [20] Hongbo Wang. Kinematic analysis of robot with two arms, Sixth Int. Symposium on China Development in 21 Century, Tokyo, Japan, November, 2003
  [21] Fumio Kasagami, Hongbo Wang, Masahiro Araya, Ichiro Sakuma and Takeyoshi Dohi. Development of robot to assist patient transfer, Proc. Int. Conf. System, Man and Cybernetics, Hague, Netherlands, Oct. 2004, pp. 4383-4388 (EI)
  [22] Fumio Kasagami, Hongbo Wang, S. Toshimitsu, Ichiro Sakuma and Takeyoshi Dohi. Patient transfer apparatus used in hospital, Proc. Int. Conf. Network, Sensing and Control, Arizona, USA, Mar. 2005, pp. 738-743 (EI)
  [23]Hongbo Wang and Fumio Kasagami, “Careful-Patient Mover Used for Patient Transfer in Hospital”, in 2007 IEEE/ICME International Conference on Complex Medical Engineering-CME2007, Beijing, May 23-27, 2007, pp. 20-26 (EI)
  [24]Hongbo wang, Lingfu Kong and Hongnian Yu, “Ceiling Light Landmarks Based Localization and Motion Control for a Mobile Robot,” 2007 IEEE International Conference On Networking, Sensing and Control, London, April 15-17, 2007, pp. 285-290 (EI).
  [25]Hongbo Wang, “Kinematics and Control for a Personal Robot with Five Degrees-of-freedom Arms,” in 2007 IEEE International Conference on Networking, Sensing and Control, London, April 15-17, 2007, pp. 507-512 (EI).
  [26]Hongbo Wang and Fumio Kasagami, “Development of Motor Controller Based on PIC,” 2007 International Conference on Convergence Information Technology, Korea, November 2007. 1102-1107(EI).
  ——————国内杂志——————
  [1] 黄真,王洪波，“复杂多环空间机构动力分析的影响系数法”，机械工程学报，1988，24(3)，74-80 (1A, EI)
  [2] 王洪波, 黄真, “螺旋理论在空间机构运动和动力分析上的应用”，机械工程学报，1992，28(2), pp. 98-102 (1A, EI)
  [3] 王洪波, 赵永生, 黄真，“空间机构受力分析的螺旋法”, 力学与实践，1992，No.4，pp. 39-42 (核心)
  [4] 王洪波, 黄真，“YS-I 并联机器人的运动和动力模型”，机械设计，1993，10(6)，pp. 42-45 (1B)
  [5] 澹凡忠，王洪波, 黄真，“6-SPS机器人的影响系数及其应用”，机器人，1989，89(5)，20-24 (1B)
  [6] 王洪波, 黄真，“六自由度并联式机器人拉格朗日动力方程”，机器人，1990，12(1)，pp. 23-26 (1B)
  [7] 吴生富，王洪波, 黄真，“并联机器人工作空间的研究”，机器人，1991，91(3)，33-39
  [8] 黄真，王洪波，“六自度并联多回路机器人动力分析的影响系数法”，机械科学与技术，1989，89(3)，41-49 (核心)
  [9] 王洪波，赵永生，黄真，“6-TPS并联机器人的力传递矩阵”，机械科学与技术，1992，41(1)，pp. 44-49 (核心)
  [10] 杨传岩，王洪波，黄真，“三角平台并联机器人工作空间研究(一) 优化算法”，机械科学与技术，1992，42(2)，pp. 12-18 (核心)
  [11] 杨传岩，王洪波，黄真，“三角平台并联机器人工作空间研究（二）结构参数的影响”, 机械科学与技术，1992，43(3)，pp.32-36 (核心)
  [12] 赵永生，王洪波，高峰，黄真，“应用旋量建立机械手的动力学模型”, 机械科学与技术，1993，46(2)，pp. 30-32 (核心)
  [13] 王洪波，黄真，“单环空间机构运动和动力分析的影响系数法”，东北重型机械学院，1987，11(4), pp.37-45
  [14] 王洪波，“空间机构运动分析的正交螺旋法”，东北重型机械学院，1991，14(1), pp.32-38
  [15] 王洪波，“5R和7R串联机械手的运动分析”，河北机电学院学报，1989，(3), pp.130-133
  [16] 澹凡忠，王洪波, 黄真，“并联机器人位置干涉的研究：（1）液压缸的干涉”,1989，（2），pp.55-59
  [17] 澹凡忠，王洪波, 黄真，“并联机器人位置干涉的研究：（2）虎克铰的干涉”,1989，（3），pp.118-123
  [18] 澹凡忠，王洪波, 黄真，“并联机器人位姿相关空间的研究”,天津学报增刊，1990，，pp.63-66
  [19] 王洪波, 齐波，孙健，刘树，“影响系数在平面机构中的应用”, 东北重型机械学院，1993, 17(3), pp. 199-205
  [20] 王洪波, 黄真，“YS-I 并联机器人的运动分析”, 东北重型机械学院，1993, 17(1), pp. 9-16
  [21] 陈超超，田行斌，王洪波，黄真，“一种用于移动机器人避障的模糊神经控制算法”，机器人，2003 (1B)

  浏览 282赞 150时间 2022-11-13